# Concrete Wheel Stops for Striping and Paving Contractors

> For striping, paving, and sealcoating contractors who install wheel stops on lot jobs: why sourcing precast concrete manufacturer-direct means better margin, fewer callbacks, and one supplier for repeat work.

Source: https://www.apcwheelstops.com/blog/concrete-wheel-stops-for-striping-paving-contractors

---

If you install or replace wheel stops as part of your parking lot work, buy them manufacturer-direct. You get better margin on the line item because there is no distributor markup, you hand your client a product that outlasts rubber or plastic so you are not going back to that lot on a callback, and you have one supplier to reorder from job after job. That is the short version. The rest of this covers how it plays out on your jobs and how to spec and order.

This is written for the contractor buyer: parking lot striping companies, asphalt paving and sealcoating crews, and lot maintenance outfits. APC (American Precast Concrete) manufactures precast concrete wheel stops in Pomona, California and ships nationwide, direct from the plant. You install; we supply.

## Why Contractors Add Wheel Stops to Lot Jobs

Wheel stops ride along with a lot of the work you already do. A striping crew relaying a lot gets asked to replace the broken bumpers while they are out there. A paving contractor tearing out and repaving a lot has to reset the stops when the new surface goes down. Sealcoating crews notice the failed plastic stops and flag them for the property manager. Lot maintenance companies handle it as part of the annual walk.

In every one of those cases, the wheel stops are a line item you control. You can mark up the product, you install the labor, and the client sees one invoice from one contractor. The question is only what product you put on that line, and where you buy it.

## Concrete vs. Rubber and Plastic, From Your Side of the Job

The material comparison usually gets framed for the property owner's budget. We break that down in detail in [concrete vs. rubber vs. plastic wheel stops](/blog/concrete-vs-rubber-vs-plastic-wheel-stops-real-cost-25-years). But you are not the property owner. You are the contractor whose name is on the work, so the math looks different from where you stand.

- **Callbacks.** Rubber stops fade and shift. Plastic stops crack, shatter, and strip their anchor bolts, often inside a couple of years. When they fail, the client calls the contractor who installed them. That is you, and that trip is on your dime if it is under warranty or on your reputation if it is not. Concrete does not fade, shift, or shatter, so the lot you finished stays finished.
- **Client satisfaction.** A property manager who watches the bumpers you installed fall apart is a property manager who shops the next job around. One that gets a lot that still looks sharp years later is a repeat client and a referral.
- **Warranty exposure.** Every stop you install is something you may have to stand behind. The failure-prone material is the one that comes back to bite you. A precast concrete stop with a long service life takes that exposure off your plate.

The upfront unit price on concrete is higher than rubber or plastic. But you are pricing the whole job, and the cheap stop is the one that generates the callback. Handing your client the durable product is the move that protects your margin and your name.

## Buying Direct vs. Through a Distributor

When you buy wheel stops through a distributor or a big-box supplier, you are paying a markup that sits between you and the plant. That markup comes straight out of the margin you could be keeping on the line item, or it forces you to raise your price to the client.

Buying manufacturer-direct cuts that layer out. APC sells direct from the Pomona plant with no distributor in the middle, so the price you get is the plant price. On a job with a handful of stops that is a modest difference. On a big lot, or across a year of jobs, it adds up to real money you keep instead of passing to a middleman.

Going direct also puts you in contact with the people who actually make the product. When you have a question about sizing for a specific lot, or you need to line up a delivery to a jobsite, you are talking to the manufacturer, not a sales desk reading from a catalog.

## Volume and Reorder Pricing

If wheel stops are a recurring part of your work, you are not buying once. You are buying on this job, then the next lot, then the one after that. That steady reorder volume is worth talking to us about.

APC offers contractor and volume pricing. The more you buy and the more consistently you come back, the better we can do on the number. Rather than quote a discount here that may not fit your situation, the right move is to [request a quote](/contact) and tell us what your typical job looks like and roughly how much you run in a year. We will price it for a contractor who reorders, not a one-time buyer.

## Delivery and Logistics

You do not want to be running to a supply yard mid-job to grab bumpers. APC ships nationwide, direct from the plant, so we can get product to your jobsite or your yard.

Concrete wheel stops are heavy, which is the whole point of the product but also the thing you plan freight around. Unit weight depends on the exact model and profile; confirm the accepted product weight before planning freight. Palletized freight and delivery are part of how we quote a job, so tell us the delivery location when you ask for pricing and we will factor it in. For a sense of how a delivery arrives and what to have ready, see [what to expect when your concrete wheel stops are delivered](/blog/what-to-expect-when-your-concrete-wheel-stops-are-delivered).

## How to Spec and Order

Start with the model or plan detail, quantity, finish, pins and pickup or delivery choice. For delivery, include the destination and receiving conditions.

- **Quantity.** Count the stops the lot needs. If you are replacing failed rubber or plastic, count what is out there plus any new stalls.
- **Size and profile.** Review the [car-stop](/car-wheel-stops) or [truck-bumper](/truck-wheel-stops) family, then identify the exact model or plan detail. APC uses a typical 4,500 PSI mix. Confirm the matching reinforcement, weight and anchoring requirements for the project; a family name does not establish an equipment-crossing rating.
- **Finish and pins.** State the selected finish and whether APC should supply pins; confirm any required pin specification.
- **Pickup or delivery.** Choose the APC pickup plant, or provide the delivery address, site access and unloading arrangements so freight can be quoted.

Confirm the accepted anchoring method, pin dimensions and quantity for the exact model and substrate. APC supplies materials; your installation team is responsible for the accepted installation detail and site work.

## Frequently Asked Questions

**Do you offer contractor pricing?**
Yes. APC sells manufacturer-direct with contractor and volume pricing available. Tell us what a typical job looks like and how much you run in a year when you request a quote, and we will price it for a repeat buyer rather than a one-off.

**Do you deliver?**
Yes. We ship nationwide direct from the plant in Pomona, California. Give us the jobsite or yard address and we will include freight in your quote.

**Can I reorder easily?**
Yes, and that is the point of buying direct. Once we have your account and your usual sizes, reordering for the next job is quick. One supplier, consistent product, no distributor in the middle.

**What sizes should I use for car lots versus truck lots?**
Review CB-series car stops for passenger parking and TB-series bumper profiles for loading docks and truck areas. APC uses a typical 4,500 PSI mix. Send the exact model or plan detail and intended use so the project team can confirm the appropriate product, reinforcement and anchoring requirements.

**Do you install?**
No. APC manufactures and supplies the wheel stops. You handle the install, which is why contractors are our buyer. We get you the product, the specs, and the delivery so your crew can set them.

---

If wheel stops are part of your lot work, put a product on that line that does not come back on you, and buy it direct so you keep the margin. [Request contractor pricing here](/contact) with your typical quantities, sizes, and jobsite location, or call us at **800-691-7118**.